Address
2221 State Highway 43 Spencer, IN 47460 USA
Store Hours
Monday — Friday
07:30 AM — 04:30 PM
Saturday
08:00 AM - 07:00 PM (Sales Only)
Sunday
Closed
Please Call for Availability
Mustang II Based Front suspension
Front End Comes Bare Metal
Kit includes:
11" Drilled & Slotted Rotors (5x4.75 or 5x4.5 Bolt Pattern)
Single Piston GM Metric Calipers
18" Steel Braided Brake Hoses-Wilwood Kits Do NOT Include Brake Lines
QA1 Single Adj. PromaStar Shocks
Adjustable Tubular Control Arms w/ Chromoly Rod Ends & Screw In Ball Joints
Ball Joint Boots, Hardware & Grease Fittings
Manual Rack and Pinion w/ Tie Rod Ends
Optional Power Rack
This Front End is Built to Your Width Per Order
Frame Width + 26" =Track Width
49" Track Width and/or 23" Wide Frame is the Narrowest Option
Front Ends Narrower than 31" Requires a Narrowed Manual Rack
The item will ship through FedEx Freight and will require a fork lift to unload.
Total Rail Length is Roughly 108"
Front End is Roughly 85" From Center of Suspension to End of Rail
Available QA1 Adjustable & Rebuildable Ball Joints
For a variety of racing applications, QA1's Screw-In Style Ultimate Ball Joint is a great choice. This patented, self-lubricating design is 100% owner rebuildable and is exclusive to QA1.
Ultimate Low Friction Operation - Infinite Preload adjustment allows breakaway torque to be set as low as 0 ft. lbs. for a completely smooth, bind-free operation.
Wear Resistant Design - Precision tolerance ball-to-race conformity results in even load distribution for unsurpassed wear resistance. Precision ground 52100 bearing steel race ensures long life and ultra-smooth operation.
On-the-Car Adjustability - Infinite preload adjustment. No need to remove the ball joint from the car for adjustment.
Self-Lubricating - Fully greasable enhanced by self-lubricating components to ensure smooth operation.
Multiple Stud Lengths Available - Various ball studs are available for easy geometry changes. Fine tune your roll center.
Owner Rebuildable - Rebuilding is simple. All parts are replaceable at economical prices.
*Each Front End is Built to Order, Expect 2-3 Weeks from Date of Purchase Until Item is Shipped.
*Expect Shock and/or Brake Upgrades to be Drop Shipped From Manufacturer
*This front end may require the use of aftermarket rack and pinion headers.
Wilwood Kit Letter Key
No Letter- Smooth Rotor, Black Caliper
D- Drilled Rotor, Black Caliper
DR- Drilled Rotor, Red Caliper
DP- Drilled Rotor, Polished Caliper
P- Smooth Rotor, Polished Caliper
R- Smooth Rotor, Red Caliper
2x3 Frame Pieces Require a Professionally Installed Roll Cage for Proper Support
No Refunds or Returns on Custom Built Frames, Front Ends or Back Halves.
Checkered Racing offers the following Returns Policy: If for any reason you are not completely satisfied, please contact Checkered Racing within 30 days. We will repair or replace any defective products. Please contact our customer service representatives at 812-829-7225 from 7:30am-4:30pm Eastern Time. The product returned are subject to a restocking fee and must be returned in its original condition to the following address: 2221 N. State Hwy 43, Spencer, IN 47460 USA. Our shop number for installation help is now 812-606-7223.
Disclaimer of Warranty: The purchaser is responsible for determining the suitability of any and all products purchased from Checkered Racing. Purchaser understands and recognizes that racing parts equipment and services by, manufactured and/or sold by Checkered Racing are subject to varied conditions due to the manner in which they are to be installed and used. Purchaser further recognizes and agrees that suitability and agrees that suitability of any part sold or manufactured by Checkered Racing for a particular application is the purchaser’s decision and that the purchaser is not relying on the skill or judgment of Checkered Racing regarding suitability of any product or service. Checkered Racing makes no warranties whatsoever, expressed or implied, oral or written to purchasers. There is no warranty of merchantability made to purchasers with regard to racing and racing equipment with the exception of those specific products covered under our Limited Lifetime Warranty as outlined below. Limited Lifetime Warranty: This warranty is limited to the specified products manufactured by Checkered Racing and the original owner only. Proof of purchase will be required. Claims must be shipped to Checkered Racing prepaid. A copy of the original invoice and $30.00 (to cover cost of handling and return freight must be included). Liability is limited to repair or replacement of defective parts to original purchaser. Checkered Racing is not liable for any consequential damages, expenses or injury arising from the use, misuse or improper installation of any product manufactured or sold by Checkered Racing. Checkered Racing reserves the right to make changes in design, add to, or improve their product without incurring any obligation to install the same on any products previously manufactured. This warranty shall not apply to any product that may be covered under the warranty of another manufacturer or which has been repaired or altered in any way so as in our judgment to effect its performance; nor has been subject to misuse, abuse, negligence or any other occurrence beyond the control of Checkered Racing.From street rods to racecars, Checkered Racing is your suspension connection. We fabricate and sell a complete line of back half and front ends to fit your needs. Our back halfs are available in any width you need to fit your project. You can order them in any stage of completion with whatever options you would like.
Store Hours
Monday — Friday
07:30 AM — 04:30 PM
Saturday
08:00 AM - 07:00 PM (Sales Only)
Sunday
Closed